Jana linke sippl session
![jana linke sippl session jana linke sippl session](https://2.bp.blogspot.com/_AVodTcGsQLI/SShA6umF2UI/AAAAAAAAAfY/kE8Ali0TeTE/s280/XX-Jana.jpg)
#JANA LINKE SIPPL SESSION INSTALL#
The rest of the install is a standard install so just follow the on screen prompts.
![jana linke sippl session jana linke sippl session](https://i.ytimg.com/vi/UIj3-CpYCn8/maxresdefault.jpg)
Ignore all the mmc partitions and look for your USB drive, if you’re not sure, look at the size of the drive.Ĭheck your partitions are correct and continue the install.
![jana linke sippl session jana linke sippl session](http://1.bp.blogspot.com/-uBZSNp0DqS8/TrGiBeDQzmI/AAAAAAAAMN4/UaCZTnkXLmU/s1600/11setsadsc_0331.jpg)
We want to leave the Chromebook’s internal drive untouched so choose the option to do something else so that we can manually setup the partitions for Ubuntu. When Linux loads make sure you can connect to the internet (I am using my trusty USB to Ethernet hub combo for a wired connection).Ĭlick on the Install Ubuntu 18.04 LTS icon and follow the on screen prompts until you get to Installation type. Choose the live Linux USB drive.Ĭhoose the option Try Ubuntu without installing. Press ESC when prompted and you will see 3 drives: the USB drive, the live Linux USB drive (I am using Ubuntu) and the eMMC (the Chromebooks internal drive). Power on the Chromebook and press Ctrl + L to get to the BIOS screen. Plug in your live Linux USB into the other USB port. Plug in your USB drive into the USB port of your Chromebook. Install LinuxĪt this stage most of the work is done and all that’s left is to install Linux: Now on startup, if you press Ctrl + L, you will get the BIOS screen instead of Chrome OS. Power off the Chromebook by typing in sudo poweroff
#JANA LINKE SIPPL SESSION PASSWORD#
Login using the password chronosĪt the terminal prompt, type sudo crossystem dev_boot_usb=1 dev_boot_legacy=1 Press Ctrl + Alt + F2 at the Chrome OS login screen. Press Ctrl + D at the initial startup screen to load Chrome OS. Let’s turn on the Ctrl + L functionality next: Pressing Ctrl + D at the screen with the red exclamation mark on startup will take you to your Chrome OS install but pressing Ctrl + L will take you to the BIOS screen to boot from your USB drive. Type this: cd bash <(curl )Ĭhoose the option to Modify my Chromebook’s RW_LEGACY slot and follow the on-screen instructions. Press Ctrl + Alt + T to bring up a terminal window tab. Your Chromebook is reset to factory settings so you will need to go through the Chrome OS setup again. Turn the Chromebook on and press Ctrl + D to bypass the screen with the red exclamation mark. Let’s now modify the BIOS to allow us to install Linux. Modify the Chromebooks BIOSīy enabling developer mode, your Chromebook will always display the screen with the red exclamation mark on startup. The Chromebook will reboot and you’ll see the screen with the red exclamation mark.ĭeveloper mode is now enabled, power off the Chromebook. You will see a timer counting down in the top right hand corner of the screen. On the next screen press Ctrl + D to bypass this message. With your Chromebook turned off hold down the ESC and Refresh While keeping them held down, press the power button once. Enable Developer modeĭeveloper mode will wipe your Chromebook back to factory settings so make sure you back up any data not on your Google drive. – Live Linux USB drive (I’m using Ubuntu 18.04) Instructions were taken from these locations: